Project Information
Building Characteristics
Generate Documents
With the Architectural Toolbox, you can obtain customized CAD drawings and a building specification for your project based on the TransitMaster 120 Escalator. You can also send a direct inquiry to KONE to obtain further information or a quotation.

All drawings are intended for preliminary planning purposes only. Drawings are not intended to be used as final or for construction purposes. Contact your local KONE representative for project specific drawings.
Country*
Please select a Country.
Insert the following project information to populate the Title Box portion of the CAD drawing.
Project Name
Building Location (City & State)
Requester Name
 
Design Documents
Which design documents do you require?
CAD Drawing
BIM Object
Specification
Please select the Dimensions Format
MetricImperial
IMPORTANT: Use toolbox navigation buttons & tabs provided. Using browser buttons may cause loss of selections.
These selections are required to generate a CAD drawing.
Code Compliance
ASME A17.1 - 2010/CSA B44 - 10ASME A17.1: (previous version)Other
 
Vertical Rise
millimeters
ft in
Vertical Rise is not a valid number.
Vertical Rise is less than the acceptable range.
Vertical rise is greater than 9.5m - Please contact your local KONE Sales Representative to request a layout drawing. This toolbox will generate a specification document only for rises greater than 9.5m.
 
Inclination
Inclination
KONE commercial escalators are available with 30° inclination.

30° inclination
  • This popular inclination offers a good compromise between passenger comfort, safety and the overall length of the escalator
  • Used in both commercial and infrastructure applications

If other inclinations are required, please contact the local KONE sales representative.
30°
 
Drive
Worm gear transmission is characterized by low noise, stable transmission and good vibration damping.

Helical gear transmission is characterized by the ability to transmit high torques in a very small space. It has a higher efficiency than worm gear transmission even at low speeds.
Drive
Worm GearHelical Gear (Chain Drive)Helical Gear (Direct Geared Drive)
 
Horizontal Steps
2Click here to close3Click here to close4Click here to close
 
Speed
0.5 m/s0.4 m/s100 f/m78 f/m
 
Transition Radii
Refers to the transition radius at the top/bottom of the escalator.
Transition Radii
1.0/1.01.5/1.0
 
Step Width
Commercial escalators are generally available in three step widths: 24", 32" and 40".

24" [600 mm] step width
  • Allows only one adult passenger to stand on each step
  • Should only be selected where space for an escalator is restricted, as it is uncomfortable for passengers and presents an old-fashioned appearance
  • As space is very restricted between the balustrades, is only suitable for installations where passengers will not be carrying large shopping bags or luggage

32" [800 mm] step width
  • Allows one adult passenger and a small child, or one adult passenger with shopping bags or luggage (i.e. 1.5 passengers) to stand on each step
  • Suitable for medium or low usage installations, such as shops

40" [1000 mm] step width
  • Allows two adult passengers to stand on each step
  • Maximizes transport capacity for high usage installations such as large department stores, shopping malls, airports and railway stations
Step Width
600 mm800 mm1000 mm24"32"40"
 
Arrangement
SingleClick here to closeParallel 2 unitsClick here to closeCriss crossClick here to close
 
Power Supply
Motor requires 3 phase power and lighting requires single phase power.
Power Supply
(frequency, motor, lighting supply)
60Hz, 460V, 120V60Hz, 575V, 120V
 
Position of the Controller Cabinet
Inside trussOutside truss
 
Intermediate Support or Reinforced Truss
(when required)
When the length of the escalator would result in the truss exceeding the maximum permitted deflection of 1/750 of the distance between supports, an intermediate support or reinforced truss is required.
If this is the case for your project, which option would be your preference:
Intermediate Truss SupportReinforced Truss
 
Operational Mode
Continuous
The unit is started by a key switch and runs continuously in the selected direction until stopped by a key switch or the emergency stop.

Stand-by speed
In the Stand-by Mode, when reduced escalator passenger activity is detected, the speed is automatically reduced to 20% of the nornal escalator speed. When passenger activity returns, the unit accelerates to the normal speed via controlled means.
Operational Mode
Continuous operationStand-by speed
 
Balustrade Type
Glass balustradeClick here to closeSolid panel - verticalClick here to closeSolid inclined SSClick here to close
 
Balustrade Thickness
10 mm12 mm3/8"1/2"
 
Balustrade Height
1000 mm40"
 
Balustrade Extension
Used when an escalator is installed in an open wellway, where there is no floor to the sides of the access covers.

Balustrade Extension
None400 mmClick here to close700 mmClick here to close16"28"
 
Passenger Fall Protection Barrier
ASME Code recommends fall protection where free fall scenarios may exist based on certain rise limitations. The additional barrier has a height of 4' 3" [1300 mm].
Passenger Fall Protection Barrier
YesClick here to closeNo
 
Support Type
StandardSeismic (earthquake fixing)
 
Truss Side Cladding Options
As required by code and for safety reasons, all exposed areas of the sides and soffit (underside) of the truss must be covered. The following are factory options now available. If the cladding is to be furnished & installed by the customer, please make the selection indicating this. NOTE: the truss is designed to accept covering not to exceed 10 lbs/sq.ft.
Truss Side Cladding Options
By CustomerGrey primed sheet steel cladding (RAL7036)Click here to closeGrey powder coated sheet steel cladding (RAL7036)Click here to closeBrushed satin stainless steel claddingClick here to closeGlass side claddingClick here to close
 
Truss Soffit Cladding Options
As required by code and for safety reasons, all exposed areas of the sides and soffit (underside) of the truss must be covered. The following are factory options now available. If the cladding is to be furnished & installed by the customer, please make the selection indicating this. NOTE: the truss is designed to accept covering not to exceed 10 lbs/sq.ft.
Truss Soffit Cladding Options
By CustomerGrey primed sheet steel cladding on truss soffitGrey powder coated sheet steel cladding on truss soffitBrushed satin stainless steel cladding on truss soffit
 
Oil Separator
If oil separator is selected, the CAD drawing will show the additional lower end pit depth required.
Oil Separator
YesNo
 
 
 
Access covers
Natural ribbed aluminumClick here to closeRibbed aluminum with black groovesClick here to closeStainless steel with punched diamond pattern with black paintClick here to closeStainless steel with punched diamond patternClick here to closeStainless steel with floor numberClick here to close
 
Comb segment materials
Yellow plasticClick here to closeBlack plasticClick here to closeAluminumClick here to closeAluminum with yellow coatingClick here to close
 
Balustrade panel configuration
Align with Truss



Align with Floor
Balustrade panel configuration
Balustrade joints perpendicular to the trussEqual length incline balustrade panels with joints perpendicular to the trussEqual length incline balustrade panels with joints perpendicualr to the floorEqual length incline balustrade panels with joints perpendicular to the truss and aligned with the deck jointsEqual length incline balustrade panels with joints perpendicular to the floor and aligned with the deck joints
 
Frontplate
Black plasticClick here to closeSatin polished stainless steelClick here to close
 
Handrail type
C handrailV handrail
 
Handrail color
BlackClick here to closeBlack with white demarcation insertsClick here to closeRedClick here to closeBlueClick here to closeGreenClick here to closeBrownClick here to closeBeigeClick here to closeGreyClick here to close
 
Decking
Silver powder coating (RAL 9007)Click here to closeNatural anodized aluminumClick here to closeBrushed stainless steelClick here to close
 
Center (common) decking
NoneYesClick here to close
 
Skirt
Sheet steel skirt with black anti-friction coatingClick here to closeBrushed satin stainless steel skirt with clear anti-friction coatingClick here to close
 
Skirt brush deflector
Silver anodized aluminum with single brushClick here to closeBlack anodized aluminum with single brushClick here to closeSilver anodized aluminium with double brushBlack anodized aluminium with double brush
 
Step type
Silver aluminumClick here to closeBlack color aluminum with metal color ribsClick here to closeSilver aluminium MovingMedia stepClick here to closeBlack aluminium MovingMedia stepClick here to closeStainless steelNatural aluminum
 
Step demarcation
Yellow plastic inserts on sides and rear edge (RAL 1023)Click here to closeYellow painted lines on sides and rear edge (RAL 1004)Click here to closeYellow painted lines on sides and rear edge with center line (RAL 1004)Click here to close
 
Moving Media step
One sign on every stepOne sign every six stepsCustomized to your needsNone
 
 
 
LED Continuous handrail lighting
Only available with glass balustrade.
LED Continuous handrail lighting
NoneYesClick here to close
 
LED Continuous handrail lighting - Color Selection
WhiteClick here to closeRedClick here to closeYellowClick here to closeGreenClick here to closeBlueClick here to close
 
LED Comb light
NoneStaticClick here to closeFlashingClick here to close
 
LED Comb light - Color Selection
WhiteClick here to closeRedClick here to closeYellowClick here to closeGreenClick here to closeBlueClick here to close
 
Green understep demarcation lighting
NoneYesClick here to close
 
Skirt lighting
Only available with glass balustrade.
Skirt lighting
NoneSkirt light (White LED Spots)Click here to closeSkirt light (LED Continuous)Click here to close
 
Skirt lighting - Color Selection
WhiteClick here to closeRedClick here to closeYellowClick here to closeGreenClick here to closeBlueClick here to close
 
LED soffit spot lighting
Only available with stainless steel or powder coated cladding.
LED soffit spot lighting
NoneOne row (Only white color)Two rows (Only white color)Click here to close
 
LED Cove lighting
Only available with stainless steel or powder coated cladding.
LED Cove lighting
NoneLED continuous soffit cove lightClick here to closeLED continuous side cladding cove lightClick here to closeLED continuous side & soffit cladding cove light Click here to close
 
LED Cove lighting - Color Selection
WhiteClick here to closeRedClick here to closeYellowClick here to closeGreenClick here to closeBlueClick here to closeWhiteClick here to closeRedClick here to closeYellowClick here to closeGreenClick here to closeBlueClick here to closeWhiteClick here to closeRedClick here to closeYellowClick here to closeGreenClick here to closeBlueClick here to close
 
 
 
Chain type
Standard chain
Lubricated step chain is standard step chain for escalators . Only the optimum amount of lubricating oil is used to achieve the service life of the chains. A lightly used escalator requires less lubrication than a heavily used one. This minimizes the accumulation of excess oil within the escalator truss and the resulting environmental and fire hazards.

Standard chain with automatic chain lubrication
Automatic step chain lubrication is also available if deemed necessary for commercial reasons.

Lubrication free chain
Lubrication-free step chains do not require regular oil lubrication. Maintenance time is therefore reduced and, as there is no accumulation of oil within the truss, internal truss cleaning requirements are minimal. Using lubrication free chain results in a cleaner environment and reduces fire hazard risk.
Chain type
Standard chainStandard chain with automatic chain lubricationLubrication free chain
 
Operating environment
Semi-outdoor
This specification is for escalators installed in an uncontrolled environment, but which are covered with a roof and walls, thereby preventing them from being directly exposed to rainwater, snow, etc.

Recommended options:
  • Bicomponent epoxy zinc dust anti-corrosion paint and synthetic resin finishing coat
  • Water drain and oil collection channels in truss
  • Stainless steel skirts with clear anti-friction coating
  • Automatic step-chain lubrication, not required with lubrication-free chains
  • Weatherproof electrical system
  • NEMA 4X motor
  • Step-chain covers
  • Stainless steel handrail guide
  • Step & step-chain rollers with sealed bearings
  • NEMA 4X exposed electrical components
Full outdoor
This specification is for an escalator installed in a fully outdoor environment, and as such will be exposed to rainwater, snow, etc.

Recommended options:
  • Hot-dipped galvanized truss with non-decorative galvanized sheet steel truss side panels, including corrosion protection for all necessary steel components
  • Stainless steel handrail guide
  • Stainless steel skirts with clear anti-friction coating
  • Automatic step-chain lubrication, not required with lubrication-free step chains
  • Step-chain covers to prevent rainwater penetrating the step connector (stub axle) brushes
  • Step rollers with sealed bearings
  • Optional lubrication-free step chain with sealed chain roller bearings
  • Water drain and oil collection channels in truss with oil/water separator, to prevent step-chain oil polluting the drainage system. The pit must be 7.9 in. (200 mm) deeper to accommodate this feature
  • Water level safety switch in lower machine compartment to stop the escalator in the event of the pit flooding with rainwater
  • Weatherproof electrical system
  • All exposed electrical components NEMA 4X rated
Operating environment
IndoorSemi outdoorFull outdoor
 
Heating options
YesNo
 
Cooling options
YesNo
 
Controller cabinet protection class
NEMA1NEMA4IP21IP54
 
Additional options
Interface to Building management system (BMS)
Diagnostic display
LED Traffic lights
 
 
 
Stop Go
You are now ready to generate your documents. Select your output format below and click the button below to proceed.
Please fix the following errors before generating your documents.
Please note:


Drawing Format
Autodesk DWGAdobe PDFAutodesk Revit
Specification Format
Adobe PDFMicrosoft Word DOC